Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
Wiring Precautions
1. First lift the connector lid with a thin screwdriver, then press the connector tab down, and pull the connector out.
2. To reinstall the connector, push it into position until it clicks, then close its lid.
Backprobing Spring-Loaded Lock Connectors
Backprobing Spring-loaded Lock Connectors
When checking voltage or resistance on this type of connector the first time, it is necessary to remove the retainer to insert tester probes from the wire
side.
NOTE: It is not necessary to reinstall the removed retainer; the terminals will stay locked in the connector housing.