Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
4. Align the bolt holes in lower arm B and the knuckle by raising the floor jack gradually, then loosely install the flange bolt.
5. Loosely install the flange bolt through the bottom of the damper.
6. Raise the rear suspension with a floor jack until the vehicle just lifts off the safety stand.
WARNING: The floor jack must be securely positioned or personal injury may result.
7. Tighten the flange bolts.
8. Tighten the two flange nuts on top of the damper to the specified torque.
9. For the left damper, install the jack, tool tray, arm-rest, pad and beverage holder.
10. For the right damper, install the beverage holder.
11. Install the rear wheels.
