Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
Wheel Bearing: Service and Repair
Rear
REMOVAL
1. Loosen the wheel nuts slightly.
2. Raise the rear of vehicle, and support it with safety stands in the proper locations.
3. Pull the parking brake lever up.
4. Remove the wheel nuts and rear wheel.
5. Remove the hub cap.
6. Raise the locking tab on the spindle nut, then remove the nut.
7. Release the parking brake lever.
8. Remove the caliper bracket mounting bolts, and hang the caliper to one side.
CAUTION: To prevent accidental damage to the caliper or brake hose, use a short piece of wire to hang the caliper from the undercarriage.
9. Remove the 6 mm brake disc retaining screws.
10. Screw two 8 x 1.25 mm bolts into the disc to push it away from the hub.
