Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.
11. Remove the brake disc.
12. Remove the hub bearing unit from the knuckle.
INSTALLATION
1. Install the hub bearing unit, spindle washer and brake disc.
NOTE:
-
Wash the bearing and spindle thoroughly in high flash point solvent before reassembly.
-
Before installing the brake disc, clean the mating surfaces of the rear hub and brake disc.
2. Install the brake caliper with the caliper bracket mounting bolts.
CAUTION: Be careful not to twist the hose more than necessary.
