Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
Transmission Mode Switch: Service and Repair
1. Raise the front of the vehicle, and make sure it is securely supported.
2. Set the parking brake, and block both rear wheels securely.
3. Shift to [N] position.
4. Remove the A/T gear position switch connector from the connector bracket, then disconnect the A/T gear position switch connector.
5. Remove the clamp from clamp bracket on the transmission housing, and remove the harness clamp from the right side cover.
6. Remove the A/T gear position switch cover, then remove the A/T gear position switch from the right side cover.
7. Set the A/T gear position switch to [N] position.
NOTE: The A/T gear position switch clicks in [N] position.
