Pickup L4-1949cc (G200z) (1984)
Fig. 5 Removing gearbox top cover. Pickup & Trooper II
4.
Hold the top cover stationary while turning the adjust screw clockwise to raise and free the cover, then remove the cover,
Fig. 5.
Fig. 6 Removing selector shaft. Pickup & Trooper II
5.
Bring worm shaft into straight ahead position and remove top cover and sector shaft from the gearbox,
Fig. 6. Hold the sector shaft in straight
ahead position when removing from gearbox. Do not drive the sector shaft out with a hammer or other impact tools.
Fig. 7 Removing and cover locknut, Pickup & Trooper II
6.
Using tool J-29753, loosen the locknut securing the end cover,
Fig. 7.
Fig. 8 Removing end cover. Pickup & Trooper II
7.
Using tool J-7624 remove end cover,
Fig. 8.