Pickup L4-2254cc 2.3L SOHC (1986)
Fig. 18 Timing Belt Removal
4.
Loosen bolt ``B'', then draw tension pulley toward water pump side, Fig. 18.
5.
Remove timing belt.
6.
Install tension spring, and temporarily tighten bolt ``B'', Fig. 18.
7.
Install timing belt and loosen bolt ``B'' to allow tension spring to tighten belt. Ensure marks on gears are still properly aligned.
8.
Temporarily tighten bolt ``B'', then turn crankshaft two revolutions in the opposite direction of normal rotation. Ensure that matchmarks are
aligned.
9.
Loosen bolt ``B'' and tighten belt with tension pulley, then torque bolt ``B'' to 14 ft. lbs.
10.
Install timing belt cover and torque to 6 ft. lbs.