isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Fuel Supply Line|Testing and Inspection|Page 1558 > < Fuel Return Line|Testing and Inspection|Page 1554
Page 1
background image

Fuel Supply Line: Testing and Inspection

INSPECTION 

The fuel tank, cap and lines should be inspected for damage, which could cause leakage. Inspect fuel cap for correct sealing and indications of
physical damage. Replace damaged or malfunctioning parts.

CAUTION: 
-

Before attempting service of any type on the fuel system, always: (1) Remove negative battery cable from battery, (2) Place "No Smoking"
signs near work area, (3) Be sure to have a dry chemical (Class B) fire extinguisher handy, (4) Wear safety glasses and (5) Siphon or pump
fuel into an explosion-proof container, to prevent the possibility of an explosion or fire.

Make sure necessary adjustments, repairs or part replacements if wear, damage or other problems are discovered during inspection. Check to see
that the pipes are not cracked and that there are no leaks.
A pipe must be replaced if either of these conditions are present.

Fuel Supply Line|Testing and Inspection|Page 1558 > < Fuel Return Line|Testing and Inspection|Page 1554