Rodeo (2WD) L4-2559cc 2.6L SOHC (4ZE1) (1991)
Brake Hose/Line: Service and Repair
Brake Pipe
BRAKE PIPE REPLACEMENT
Brake Pipe Components
REMOVAL
^ Raise the vehicle and support it with suitable safety stands.
^ Remove wheel and tire assembly.
^ Clean dirt, grease, and other foreign material off the pipe fittings at both ends.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points. After installing the brake pipes, bleed brakes.
1. Tighten the brake pipes to the specified torque.
Torque: 16 N.m (12 lb.ft.)