Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Spark Plug: All Technical Service Bulletins
Spark Plug Tube - Replacement
BULLETIN NUMBER
SB95-01-L002
ISSUE DATE
AUGUST 1995
GROUP
ENGINE
TROOPER (UX) AND RODEO (UC) 6VD1 SOHC SPARK PLUG TUBE REPLACEMENT
APPLICABLE VEHICLES
Trooper (UX) and Rodeo (UC) models equipped with 6VD1 SOHC engine.
SERVICE INFORMATION
If a spark plug tube (cylinder head tube) must be replaced, use the following procedure:
DISASSEMBLY
1.
Spark Plug Tube
^
Remove spark plug tube using Kent-Moore tool J-41730 and slide hammer J-2619-01 (Figure 1A and 1B). Leave spark plug intact.
CLEAN
^
Spark plug tube joining area. Carefully remove all varnish, soot, and old adhesive.
Do not use motorized wire brush for cleaning.
REASSEMBLY
1.
Spark Plug Tube
^
Apply LOCTITE 290, or equivalent, to outer edge of spark plug tube (Figure 1C).