Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Fuel Rail: Service and Repair
Before starting disconnect battery ground cable.
Fuel Injector Rail
REMOVAL
1. Remove air cleaner assy.
2. Disconnect accelerator cable from throttle body and cable brackets and remove cable.
3. Disconnect canister vacuum hose from Vacuum Switching Valve (VSV).
4. Disconnect Air vacuum hose from common chamber..
5. Disconnect vacuum booster hose from common chamber duct.
6. Disconnect Connectors from Manifold Absolute Pressure sensor, canister Vacuum Switching Valve (VSV), Exhaust Gas Recirculation VSV,
Intake Air Temperature and ground cable.
7. Remove spark plug wires from cylinder heads.
8. Disconnect three connectors from Ignition Control Module assembly, Remove three Electronic Ignition bracket fixing bolts, and remove
Electronic Ignition assembly with plug wires.
9. Remove four bolts from throttle valve housing and remove housing.
10. Disconnect EVAP canister and Exhaust Gas Recirculation VSV hoses from throttle body.
11. Disconnect Positive Crankcase Ventilation (PCV) hose from common chamber duct.
12. Disconnect fuel pressure control vacuum hose from common chamber.
13. Disconnect canister purge hose from common chamber duct.
14. Remove two bolts securing EGR valve assy to common chamber. Disconnect Backpressure Transducer (BPT) hose and remove Exhaust Gas
Recirculation (EGR) valve.
15. Remove six bolts, two nuts, and three duct bracket bolts. Remove common chamber duct and remove duct.
16. Remove fuel feed and return hoses from fuel pipe and two bolts from cylinder head cover.
17. Disconnect thermo sensor and injector connectors.