Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-1046001.png)
Ball Joint: Testing and Inspection
1. Remove ball joint from control arm.
2. Inspect grease boot for any cuts or any signs of leakage.
3. Swivel ball joint stem back and forth several times, ensure joint moves smoothly.
4. Install nut onto ball joint stem, then using a suitable torque wrench, check starting torque. See: Specifications