Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Transfer Case: Service and Repair
Removal and Installation
REMOVAL
Preparation:
-
Disconnect battery negative (-) cable.
-
Drain transfer case fluid.
1. Exhaust and transfer protectors
2. Rear propeller shaft
3. Front propeller shaft
-
Remove the rear and front propeller shaft from the transfer case side.
4. Exhaust pipe
-
Remove the catalytic converter.
-
Remove the center exhaust pipe.
-
Disconnect oxygen sensor connector from the transmission harness.
5. Front console
-
Remove the transfer control lever knob.
-
Disconnect the harness connectors.
6. Selector lever assembly