Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-920005.png)
BLOCK RING AND INSERT CLEARANCE
Use a vernier caliper to measure the clearance between the block ring and the insert.
If the measured value exceeds the specified limit, the block ring and the insert must be replaced Block ring and insert clearance mm (in)
Standard .......................................................................................................................................................................... 4.34 4.66 (0.171 - 0.183) mm (in)
Limit ........................................................................................................................................................................................................ 4.9 (0.193)mm (in)
BLOCK RING AND DOG TEETH CLEARANCE
Use a thickness gauge to measure the clearance between the block ring and the dog teeth.
If the measured value is less than the specified limit, the block ring must be replaced.
Block ring and dog teeth clearance
Standard ................................................................................................................................................................................................ 1.5 (0.059) mm (in)
Limit ...................................................................................................................................................................................................... 0.8 (0.031) mm (in)
CLUTCH HUB AND INSERT CLEARANCE
Use a thickness gauge to measure the clearance between the clutch hub and the insert.
If the measured value exceeds the specified limit, the clutch hub and the insert must be replaced. Clutch hub and insert clearance
Standard ......................................................................................................................................................................... 0.09-0.31(0.0035-0.0122) mm (in)
