Rodeo (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
-
Oil seal replacement
-
Input shaft oil seal:
-
Remove the oil seal from the transfer case.
-
Apply engine oil to the oil seal outer surfaces.
-
Apply recommended grease (BESCO L2) or equivalent to the oil seal lip.
-
Use the oil seal installer to install the oil seal to the transfer case
Front output shaft oil seal:
-
Remove the oil seal from the transfer case.
-
Apply engine oil to the oil seal outer surfaces.
-
Apply recommended grease (BESCO L2) or equivalent to the oil seal lip.