Rodeo 2WD V6-3.2L (2003)
11. Remove the rear roof trim cover.
-
Pry the trim cover clips free from the body panel.
12. Remove the tonneau cover assembly (1).
13. Remove the lower anchor bolt cover (6) and the lower anchor bolt (5) from the rear seat belt.
14. Remove the lower quarter trim cover (1).
-
Remove the tool box lid (3) and fixing screw (4). Pry the five clip positions (2) free from the body panel.
-
Disconnect the accessory socket connector (LH side).
15. Remove the upper quarter trim cover (1).
-
Pry the twelve clip positions (2) free from the body panel.
