Rodeo 2WD V6-3.2L (2003)
2. Use a micrometer to measure the diameter and the uneven wear of the camshaft journals.
Replace the camshaft if the diameter or the uneven wear exceeds the specified limit.
Journal Diameter
Standard: 25.972 mm - 25.993 mm (1.0225 inch - 1.0233 inch)
Limit: 25.8 mm (1.0157 inch)
Uneven wear: 0.05 mm (0.0020 inch)
3. Place the camshaft on V-blocks.
Slowly rotate the camshaft and measure the runout with a dial indicator.
Replace the camshaft if the runout exceeds the specified limit.
Run out
Limit: 0.1 mm (0.0039 inch)
4. Measure the camshaft journal oil clearance.
1. Measure the camshaft bearing cap housing inside diameter.
Note: Tighten camshaft bearing cap (2) to specified torque before measuring the camshaft bearing cap inside diameter.
Torque: 10 Nm (87 inch lbs.)
