isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service Precautions|Page 730 > < Brake Bleeding|Service and Repair|Page 726
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions

Service Precautions

CAUTION:  When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener needs to be replaced,
use the correct part number fastener for that application. If the correct part number fastener is not available, a fastener of equal size and strength (or
stronger) may be used. Fasteners that are not reused, and those requiring thread locking compound will be called out. The correct torque value must be
used when installing fasteners that require it. if the above conditions are not followed, parts or system damage could result.

WARNING:  WHEN PERFORMING SERVICE ON OR AROUND SRS COMPONENTS OR SRS WIRING, FOLLOW THE PROCEDURES
LISTED BELOW TO TEMPORARILY DISABLE THE SRS. FAILURE TO FOLLOW PROCEDURES COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY OR OTHERWISE UNHEEDED SRS REPAIRS.

Air Bag(s) Arming and Disarming|Service Precautions|Page 730 > < Brake Bleeding|Service and Repair|Page 726