Rodeo 2WD V6-3.2L (2003)
Cruise Control Switch: Service and Repair
Cruise Control Main Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the meter cluster assembly (1).
-
Refer to the Instrument Panel Assembly in Body Structure section.
3. Remove the cruise control main switch (3).
-
Disconnect the switch connector.
-
To remove the cruise main switch, illumination controller and transfer switch assembly (2), push the lock from the back side of the meter
cluster assembly.
-
Remove the cruise main switch from the back side of the switch assembly (2).
Installation
To install, follow the removal steps in the reverse order.