Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Hydraulic Unit: Service and Repair
Solenoid Valve Body
Anti-Lock Hydraulic Valve Assembly
There are no replaceable parts inside the valve assembly; it can only be replaced as an assembly. Do not replace it unless so instructed by the diagnosis
chart.
1. With the ignition OFF, unplug the harness connector.
2. Use the proper wrench to remove the 2 brake pipes.
3. Remove the two mounting bolts.
4. Remove the valve assembly.
5. Installation is the reverse of removal.
Specs
Torque the brake pipe fittings to 12 Nm (9 lb. ft.)