Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Wheel Speed Sensor: Service and Repair
Four Wheel Antilock Brakes
Front
Front Wheel Speed Sensor
REMOVAL
1. Speed sensor connector
2. Sensor cable fixing bolt (Upper side)
3. Sensor cable fixing bolt (Lower side)
4. Sensor fixing bolt
5. Speed sensor
INSPECTION AND REPAIR
^
Check the speed sensor pole piece for presence of foreign materials; remove any dirt, etc.
^
Check the pole piece for damage; replace speed sensor if necessary.
^
Check the speed sensor cable for short or open circuit, and replace with a new one if necessary. To check for cable short or open, bend or stretch
the cable while checking for continuity.
^
Check the sensor ring for damage including tooth chipping, and if damaged, replace the sensor ring in Section 4C "Front hub and disc".
INSTALLATION
1. Speed sensor (5)
^
Take care not to hit the speed sensor pole piece during installation.
2. Speed sensor fixing bolt (4)
^
Tighten the fixing bolt to the specified torque.
Specs:
Torque to 24 Nm (95 lb. in.)
3. Speed sensor cable fixing bolt (Lower side) (3)
^
Tighten the fixing bolt to the specified torque.
Specs:
Torque to 11 Nm (18 lb. ft.)
4. Speed sensor cable fixing bolt (Upper side) (2)
^
Tighten the fixing bolt to the specified torque.
Specs:
Torque to 6 Nm (52 lb. in.)