Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1246002.png)
(G) Adjust the stop light switch to the specified clearance (between switch housing and brake pedal) by rotating the switch housing.
Spec:
Clearance 0.5-1.0 mm (0.02-0.04 in.)
NOTE: Do not attempt to force the push rod into position during the stop light switch installation and adjustment procedure.
(H) Tighten the stop light switch lock nut.
(I) Connect the stop light switch connector.
