Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Brake Hose/Line: Service and Repair
Brake Line
Brake Pipe Components
REMOVAL
^
Raise the vehicle and support it with suitable safety stands.
^
Remove wheel and tire assembly.
^
Clean dirt, grease, and other foreign material off the pipe fittings at both ends.
Order of Removal
1. Brake pipe
2. Plastic clip
Specs:
Tighten brake pipes to 16 Nm (12 lb. ft.)
INSTALLATION
To install, follow the removal steps In the reverse order, noting the following.
-
Always use new copper gaskets.
-
After installing the brake hoses, bleed brakes. See: Brake Bleeding/Service and Repair/Hydraulic System Bleeding/RWAL ABS