Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Rocker Arm Assembly: Testing and Inspection
Rocker Arm Shaft
DIAMETER
Use a micrometer to measure the rocker shaft outside diameter at the point where the rocker arm moves on the rocker shaft. Replace the rocker
shaft if the diameter exceeds the specified limit.
RUNOUT
1. Place the rocker shaft on V-blocks.
2. Set the dial indicator.
3. Slowly rotate the rocker shaft and measure the runout.
^
If the runout is in excess of the specified limit, the rocker shaft must be replaced.