Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Headlamp: Removal and Replacement
REMOVAL
Preparation:
Disconnect the battery ground cable.
1. Radiator grille
^
Use a screwdriver to raise the clip and release the lock.
Place a clean rag beneath the screwdriver tip to protect the body painted surfaces.
2. Side marker light
^
Remove 3 (three) screws.
^
Disconnect the connector.
3. Headlight assembly
^
Disconnect the connector.
^
Remove 4 (four) screws.
INSTALLATION
To install, follow the removal steps in the reverse order.