Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Marker Lamp: Service and Repair
SIDE MARKER LIGHT BULB
REMOVAL
Preparation:
Disconnect the battery ground cable.
1. Side marker light
^
Use a screwdriver to raise the radiator clip and release the lock.
^
Remove three screws.
2. Bulb
^
Turn the socket counterclockwise to remove it.
^
Pull the bulb out.
INSTALLATION
To install, follow the removal steps in the reverse order.
SIDE MARKER LIGHT ASSEMBLY
REMOVAL
Preparation:
Disconnect the battery ground cable.
1. Refer to "SIDE MARKER LIGHT BULB" removal step 1. ZZZZZZZ
2. Disconnect the connector.
INSTALLATION
To install, follow the removal steps in the reverse order