Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
-
Remove a ball bearing and bearing cover from the gear case.
19. Internal gear
20. Planet gear (3)
-
Remove internal gear and planet gear.
21. E-ring
-
Remove an E-ring from the pinion shaft using a flat-blade screwdriver.
22. Pinion
Disassembling pinion
-
Holding the pinion shaft, push pinion toward the center bracket.
-
Turn the pinion clockwise or counterclockwise by one tooth of spline, then pull off the pinion.
23. Thrust washer (2)
24. Center bracket
25. Pinion shaft.
REASSEMBLY