Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
-
Compressor: J-23327-91.
9. Clutch plates.(7) Install clutch plates, start with steel plate and alternate with lined plates.
10. Backing plate.(6)
11. Snap ring.(5)
12. Turbine shaft.(4)
13. Sun gear.(3) Overdrive sun gear, countersink pointing downwards.
14. Overdrive carrier assembly.(2) Complete overdrive carrier assembly.
NOTE: Turn the assembly in a counter-clockwise direction only until roller clutch enters the outer race. After assembly, rotate the assembly and
listen for loose rollers.
15. Snap ring.(1)