Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
![background image](/isuzu/rodeo_ls_2wd/v6-3165cc_3.2l_sohc_(6vd1)/Page-1137001.png)
Drive/Propeller Shaft: Service and Repair
TOOLS REQUIRED
^
J-22888 Center Support Bearing Remover
^
Or Equivalent
NOTE: Prior to removal do the following:
^
Raise the vehicle on a hoist.
^
Support the propeller shaft together with center support bearing.
^
Do not allow the universal joint to bend deeply, as universal joint could fracture.
REMOVAL
1. 2nd propeller shaft
2. Center support bearing: Detach the outer retainer of center support bearing and remove the center support bearing with special tool.
-
Center support bearing remover: J-22888
3. 1st propeller shaft