isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Engine - MIL ON/High Erratic Idle/Noise|Page 2135 > < Exhaust System|Diagrams|Page 2123
Page 1
background image

Technical Service Bulletin # SB00-01-S007

Date: 000801

Engine - MIL ON/High Erratic Idle/Noise

BULLETIN NUMBER:
SB00-01-S007

ISSUE DATE:
AUGUST 2000

GROUP:
AIR CONDITIONING

1998-2000 RODEO/AMIGO:
HIGH/ERRATIC IDLE CONDITION

AFFECTED VEHICLES

1998-2000 Rodeo (UE)/Amigo (UA) models with 3.2L V6 engines

SERVICE INFORMATION

Condition:
Some owners may comment on high/erratic idle and/or the MIL light on. In some cases, vacuum leak noise may be heard as well.

Possible Cause:
^

There may be poor contact or loss of contact at various main ground points or electrical connections.

^

Power steering pressure switch may be shorted with debris.

^

Inlet manifold gasket may be leaking.

^

Broadcast code and calibration part number may need to be updated.

Correction:
To correct this condition, follow the procedures outlined in this bulletin to determine proper diagnosing, inspection and correction of ground contact
points for proper electrical contact, power steering pressure switch cleaning or replacement and power steering system flush, replacement of inlet
manifold gasket, and/or PCM reprogramming.

PARTS INFORMATION

WARRANTY CLAIM INFORMATION

Engine - MIL ON/High Erratic Idle/Noise|Page 2135 > < Exhaust System|Diagrams|Page 2123