Rodeo LSE 4WD V6-3.2L (2000)
8. Align timing mark on intake camshaft (one dot for right bank, two dot for left bank) and exhaust camshaft (one dot for right bank, two dots for left
bank) to timing mark on camshaft drive gear (one dot).
9. Tighten twenty bolts on numerical order an one side bank as shown in the illustration.
Torque: 10 Nm (89 inch lbs.)
10. Install cylinder head cover RH.
11. Install cylinder head cover LH.
12. Install timing belt.
13. Install crankshaft pulley.
14. Install Accelerator pedal cable.
