Rodeo LSE 4WD V6-3.2L (2000)
The size mark (1) for piston outside diameter is represented as shown in Figure.
Outside Diameter
Size Mark A: 93.360 mm - 93.370 mm (3.6756 inch - 3.6760 inch)
Size Mark B: 93.371 mm - 93.380 mm (3.6760 inch - 3.6764 inch)
Size Mark C: 93.381 mm - 93.390 mm (3.6764 inch - 3.6768 inch)
Measure the cylinder bore inside diameter (refer to Cylinder Block).
Piston Rings (8)
Any worn or damaged part discovered during engine overhaul must be replaced with a new one.
1. Ring end gap measurement
^
Insert the piston ring into the bore.