Rodeo LSE 4WD V6-3.2L (2000)
^
With J-24086-C Piston pin service set and a press, press fit the piston pin.
Note: Heat the connecting rod small end to a suitable temperature to ensure smooth installation.
4. Install piston ring with the piston ring expander.
The compression ring must be set with the T mark (1) facing up.
Marked T: No.1 Compression ring
Marked T2: No.2 Compression ring
^
Install piston rings in the following sequence.
1. Oil ring
Expander ring
Upper side rail
Lower side rail
2. 2nd compression ring
3. 1st compression ring
^
The compression rings must be set with the T or T2 mark facing up.
Marked T: No. 1 Compression ring
Marked T2: No.2 Compression ring