Rodeo LSE 4WD V6-3.2L (2000)
2. Install water pump assembly and tighten bolts to the specified torque in sequence (shown in image).
Torque: 25 Nm (18 ft. lbs.)
Note: To prevent the oil leakage, apply the LOCTITE 262 or an equivalent, to the arrow marked fixing bolt thread.
3. Idle pulley
^
Install idle pulley and tighten bolt to the specified torque.
Torque: 52 Nm (38 ft. lbs.)
4. Timing belt
^
Install timing belt.
5. Connect radiator inlet hose and replenish engine coolant.
6. Connect battery ground cable.
