isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2790 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2788

Rodeo LSE 4WD V6-3.2L (2000)

Page 3
background image

3. Check the vacuum hose to the sensor for leaking or restriction, Be sure that no other vacuum devices are connected to the MAP hose.

IMPORTANT:  Make sure the electrical connector remains securely fastened.

4. Disconnect the sensor from the bracket. Twist the sensor with your hand to check for an intermittent connection. Output changes greater than 0.10

volt indicate a bad sensor.

Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2790 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2788