Rodeo LSE 4WD V6-3.2L (2000)
2. Install the ignition coil assemblies and spark plug boot over the spark plug.
CAUTION: Ignition coil assembly # 6 is different from ignition coil assembly from # 1 to # 5. ignition coil assemblies # 6 is short type. So, note
it when installing ignition coil assembly of # 6.
3. Install ignition coil assemblies and tighten the fixing bolts to the specified torque.
Torque: 4 N.m (35.4 lb in)
4. Connect the ignition coil connector at the ignition coil assemblies.
5. Connect the negative battery cable.
