Rodeo LSE 4WD V6-3.2L (2000)
Malfunction Lamp / Indicator: Testing and Inspection
Warning Lamp Does Not Come "ON" Steady
Circuit Description
When the ignition switch is first turned "ON", "ignition 1". voltage is applied from the "MA01" meter fuse to the "AIR BAG" warning lamp which is
connected to "SRS warning lamp", terminal "7" The "SRS-1" fuse apply system voltage to the "ignition 1" inputs, terminals "12". The SDM responds by
flashing the "AIR BAG" warning lamp seven times. If "ignition 1" voltage is more than 16 volts, the "AIR BAG" warning lamp will be still "OFF" solid
with no DTCs set.
