Rodeo LSE 4WD V6-3.2L (2000)
Seat Belt Buckle: Service and Repair
Rear Center Seat Belt / Buckle Assembly
Rear Center Seat Belt / Buckle Assembly And Associated Parts
Removal
1. Remove the seat lock cover (SWB).
2. Remove the rear cushion frame assembly (LWB).
3. Remove the rear seat lock assembly and rear seat belt buckle assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the rear seat lock assembly and rear seat belt buckle assembly fixing bolts to the specified torque.
Torque: 39 N.m (29 lb ft)
NOTE: Removal and installation procedure of rear center seat belt assembly same as rear seat belt buckle assembly procedures.