Rodeo LSE 4WD V6-3.2L (2000)
-
Propeller shaft for run-out (Aluminum tube type).
Static run-out limit: 1.0 mm (0.04 inch)
TIR full length of tubing maximum.
(TIR: Total Indicator Reading)
-
Propeller shaft for run-out (Steel tube type).
Static run-out limit: 0.13 mm (0.005 inch)
TIR on the neck of the slip tube shaft (with a boot).
0.25 mm (0.010 inch)
TIR on the ends of the tubing 3 inches from the welds.
0.38 mm (0.015 inch)
TIR at the linear center of the tube.
0.38 mm (0.015 inch)
TIR for the full length of tube with 30" or less of tubing.
(TIR: Total Indicator Reading)
-
Play in universal joint.
Limit: Less than 0.15 mm (0.006 inch)
