isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Front Drive Shaft Assembly|Page 3845 > < Front Drive Shaft Assembly|Page 3843
Page 6
background image

Limit: 36.98 mm (1.456 inch)

Actuator
Check and see that there is no damage, cracking, or other abnormality.

FUNCTIONAL CHECK

Make sure if function with voltage 12 V applied to terminals 3, 4 and set the tester to terminal 1, 2 in accordance with the table.
If there is an abnormality, replace the actuator as an assembly.

NOTE:  Be careful not to permit the entry of water or dust into the actuator.

Front Drive Shaft Assembly|Page 3845 > < Front Drive Shaft Assembly|Page 3843