Rodeo LSE 4WD V6-3.2L (2000)
-
Apply the adhesive to the entire circumference of the glass, as shown in the figure.
-
Insert the glass clips into the panel and then push the glass against the panel to affix it in place.
-
Wipe away any adhesive that oozes out around the edges.
2. Install the side window garnish assembly.
-
Install it securely so that it does not come loose in places.
3. Install the side window molding.
-
Insert it securely so that it does not come loose in places.
-
Make sure that there is no water leakage from the side window glass.
4. Install the quarter trim cover.