Rodeo S 2WD L4-2.2L (1999)
6. Use J-8062 valve spring compressor and J-42619 adapter to remove split collar (9).
7. Remove spring upper seat and valve spring (10), (11).
8. Valve, valve guide - use commercially available remover pliers.
Valve spring lower seat from cylinder head.
INSPECTION AND REPAIR
1. Use a internal micrometer to measure the diameter valve guide.
Valve stem play
Intake: 0.03 to 0.057 mm (0.0012 to 0.0022 inch)
Exhaust: 0.04 to 0.067 mm (0.0016 to 0.0026 inch)
Valve Guide
CAUTION: Taking care not to damage the valve seat contact surface, when removing carbon adhering to the valve head. Carefully inspect the valve
stem for scratching or abnormal wear. If these conditions are present, the valve and the valve guide must be replaced as a set.
Valve Seat
Valve seat width in cylinder head
Intake: 1.0 to 1.5 mm (0.039 to 0.0585 inch)