Rodeo S 2WD L4-2.2L (1999)
22.
Lift the adapter case off the main case (see figure 10).
23.
Remove the selective washer from the center support housing (see figure 11).
24.
Remove two oil passage 0-rings from the main case and discard them (see figure 12).
25.
Install two oil passage 0-rings on the main case (8-96014-270-0 0-Ring, Case Drain Back 2x). Lube them with DEXR0N(R)-III with a G-License
Number (G-XXXX) (refer to bulletin IB03-05-S001 4L30E/4L60E Transmission Fluid) (see figure 12).
26.
Compress the reverse spring seat with Special Tool P/N J-23327 (Reverse Spring Seat Compressor) (see figure 13).