Rodeo S 4WD V6-3.2L (1999)
Brake Rotor/Disc: Service and Repair
Removal and Installation
Front Brake Rotor
DISASSEMBLED VIEW
DISASSEMBLY
1. Before disassembly, select the 2WD position with the 4WD switch.
2. Jack up the front of vehicle and support frame with jack stands.
3. Remove the disc brake caliper assembly and hang it on the frame with wires.
4. Remove bolt.
5. Remove cap.
6. Remove snap ring and shim.
7. Remove hub flange.
8. Remove lock washer and lock screw.
