Rodeo S 4WD V6-3.2L (1999)
Figure 7: Passenger side Upper Trailing Link
IMPORTANT:
Torque on nut side, not the bolt side. If torque wrench is placed on bolt side, in-correct values may occur. Bolt and Nut may still loosen.
4.
Torque driver (axle) side Lateral Link Nut, and driver & passenger side Shock Absorber Nut. (Torque: 69 lb ft - Nut side)
Figure 8: Driver side Shock Absorber
Figure 9: Passenger side Shock Absorber & Lateral Link
5.
Remove driver & passenger side Stabilizer Shackle Nuts and Bolts both top and bottom), and replace with New Nylock Nuts & bolts, and torque.
(Torque: 15 lb ft-Nut side)