isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Ignition Switch - Won't Turn to The Lock Position|Page 3437 > < Ignition Switch - Won't Turn to The Lock Position|Page 3435

Rodeo S 4WD V6-3.2L (1999)

Page 2
background image

7. Remove selector lever knob and cover.
8. Disconnect select cable.
9. Disconnect shift lock cable.

10. Remove selector lever subassembly.
11. Disconnect harness connector by pressing down the connector claw in the back of select lever subassembly.

INSTALLATION

1. Install selector lever subassembly.
2. Connect shift lock cable.
3. Connect select cable.

Ignition Switch - Won't Turn to The Lock Position|Page 3437 > < Ignition Switch - Won't Turn to The Lock Position|Page 3435