Rodeo S 4WD V6-3.2L (1999)
1. Band. Raise the hooked end of the band with a screwdriver or equivalent.
2. Band.
3. Circlip. Pry off with a screwdriver or equivalent.
4. Drive shaft joint assembly
5. Ball. Remove the six balls with a screwdriver or equivalent.
6. Snap ring. Using snap ring pliers, remove the snap ring fastening the ball retainer to the center shaft.
7. Ball retainer.
8. Ball guide.
9. Bellows.
10. Band. Raise the hooked end of the band with a screwdriver or equivalent.