Rodeo S 4WD V6-3.2L (1999)
4. Washer and spacer.
5. Mounting bolt and nut. Tighten the mounting bolt and nut to the specified torque.
-
Torque 152 Nm (112 ft. lbs.).
6. VSV Assembly. Tighten nuts to 8 Nm (69 inch lbs.). Install the shift switch connector (7a).
NOTE: Be careful not to permit the entry of dust into the connector.
7. Vacuum Hose. Install the actuator side of hose.
NOTE: Be careful not to permit the entry of dust into the hose.
8. Breather Hose.
9. Protector. Tighten bolts to specified torque.
-
Torque 26 Nm (20 ft. lbs.).
10. Propeller shaft.
11. Suspension crossmember.
12. Steering link and arm assembly.
13. Hub assembly (Disc, back plate and knuckle).