Rodeo S 4WD V6-3.2L (1999)
Torque: 116 Nm (85 ft. lbs.)
11. Clean the actuator contact surface with the housing then Install and tighten shift position switch to specified torque.
Torque: 39 Nm (29 ft. lbs.)
12. Apply liquid gasket to the contact surface on the actuator side.
13. Align shift arm with the groove of sleeve and install the actuator.
14. Tighten bolts to specified torque.
Torque: 13 Nm (113 ft. lbs.)
15. Install front axle drive shaft and mounting bracket. Tighten fitting bolts to specified torque.
Torque: 116 Nm (85 ft. lbs.)
16. Pour specified amount of differential gear oil to filler plug.
Front Differential
Oil Capacity: 1.4 lit (1.48 US qt.)
Actuator Housing
Oil Capacity: 0.12 lit (0.13 US qt.)
17. Install filler plug through gasket and tighten to specified torque.
Torque: 78 Nm (58 ft. lbs.)
