Rodeo S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1322004.png)
Connecting Vinyl Pipe To Bleeder Screw
2. Connect a vinyl pipe to the bleeder screw on right rear wheel cylinder or caliper body and place the other end of the pipe in a transparent
container.
Releasing Brake Fluid
3. Pump the brake pedal several times and hold it depressed. Loosen the bleeder screw to release brake fluid together with air bubbles. Tighten the
bleeder screw before pressure is released completely.
4. Repeat step 3 until the air bubbles disappear completely. Securely tighten the bleeder screw when the air bubbles disappear completely.
5. Repeat step 3 and 4 on the remaining wheel cylinders or calipers.
Filling Brake Fluid To "MAX" On Reservoir
6. Fill the brake fluid to the "MAX" mark on the reservoir. Pour brake fluid carefully so as not to produce air bubbles.
